Chronic kidney disease is characterized by a gradual decline in renal function that progresses toward end-stage renal disease.Podocytes are highly specialized glomerular epithelial cells which form with the glomerular basement membrane (GBM) and capillaryendothelium the glomerular filtration barrier. GBM is an extracellular matrix (ECM) that acts as a mechanical support and providesbiophysical signals that control normal podocytes behavior in the process of glomerular filtration. Thus, the ECM stiffness represents anessential characteristic that controls podocyte function. Hydrolyzed Polyacrylamide (PAAm) hydrogels are smart polyelectrolytes materials.Their biophysical properties can be tuned as desired to mimic the in natural ECM. Therefore, these hydrogels are investigated as new ECM-like constructs to engineer a podocyte-like basement membrane that forms with cultured human podocytes a functional glomerular-like filtration barrier. Such ECM-like PAAm hydrogel construct will provide unique opportunity to reveal podocyte cell biological responses in an in vivo-like setting by controlling the physical properties of the PAAm membranes. In this work, Hydrolyzed PAAm scaffolds having different stiffness ranging between 0.6− 44 kPa are prepared. The correlation between the hydrogel structural and mechanical properties and Podocytes morphology, elasticity, cytoskeleton reorganization, and podocin expression is evaluated. Results show that hydrolyzed PAAm hydrogels promote good cell adhesion and growth and are suitable materials for the development of future 3D smart scaffolds. In addition, the hydrogel properties can be easily modulated over a wide physiological range by controlling the cross-linker concentration. Finally, tuning the hydrogel properties is an effective strategy to control the cells function. This work addressed the complexity of podocytes behavior which will further enhance our knowledge to develop a kidney-on-chip model much needed in kidney function studies on both healthy and diseased states.

Extensive use of porous silicon (PSi) for tissue engineering is due to its convenient properties as it is both non-toxic and bioresorbable. Moreover, PSi surface modification is an important step to enhance cell adhesion and proliferation. In this work, a combination of optical and electrochemical studies is performed to elaborate a suitable PSi multilayer substrate for cell culture. For this study, we modified PSi surface by silanization and antibody grafting (APTES-anti STRO1), the 12-mer specific peptide to silicon p+type coating and the peptide modified with the antibody recognition sequence. Electrochemical characterization of PSi multilayers is performed to investigate its electrical behavior, determine the optimal measuring conditions and reveal the most stable PSi surfaces. Then, the behavior of dental pulp stem cells (DPSC) was investigated on various modified PSi surfaces. An electrochemical method was applied for the first time monitoring the electrical behavior of stem cell adhesion. The cells electrochemical behavior depends on the nature of the surface coating and the peptide-anti STRO1 improved adhesion and cell spreading onto the PSi surface compared to bare surface and the one coated with the peptide. Fluorescent microscopy revealed that all surface modi cation methods enhance cell adhesion compared to the bare PSi surface. An increased cell number is observed on APTES-anti STRO1, peptide and peptide-anti STRO1 coated PSi. The peptide-anti STRO1 provided the best cell proliferation results suggesting the improved accessibility of the recognition fragment of the antibody anti-STRO1.

Functionalizing the surface of chalcogenide films is of major interest due to the wide use of these materials in infrared integrated optics. A functionalization route via short peptides that has been already used for silicon, ZnSe and other semiconductors is applied to amorphous films of the ternary Ge-Se-Te system. The biotinylated 12-mer peptides LLADTTHHRPWT and SVSVGMKPSPRP were chosen and used to capture streptavidin. High-resolution atomic force microscopy images highlight that the 12-mer peptide LLADTTHHRPWT provides better interface layers for streptavidin molecule detection.

Microgels display specific features attracting a high research interest in several applications such as bioactives, drug delivery or protein purification. Whey protein microgels (WPM) are obtained by promoting whey protein intramolecular cross-linking through heat treatment. Temperature-induced protein denaturation and aggregation involves several kinds of interactions such as electrostatic repulsions and disulfide bonds. In the present work, the WPM particles topography and nanomechanical properties were investigated at native pH (6.5) and acid pH (5.5 and 3.0) by atomic force microscopy (AFM) in contact mode in a liquid environment. Prior to AFM analysis, WPM particles were captured on a gold substrate via low energy interactions by means of specific monoclonal antibodies. The 2D AFM images clearly showed a swelling of WPM particles induced by pH decrease. At native pH, they displayed an average width and height of 192 ± 27 nm and 44 ± 9 nm, respectively. A decrease in pH to 5.5 led to a significant (p<0.05) increase in WPM particles width (282 ± 9 nm) and height (101 ± 1 nm). At pH 3.0, a further increase in WPM size (a width of 420 ± 25 nm and a height of 78 ± 1 nm). The AFM elasticity (E) data showed a significant (p<0.05) increase in stiffness at pH 5.5 (E: 199 ± 9 kPa) and pH 3.0 (E: 187 ± 12 kPa) compared to native pH (E: 12 ± 1 kPa). These findings indicate that the mechanical profiles of WPM network directly varied with pH decrease. The WPM topographic and nanomechanical changes induced by acidification were most likely due to substantial changes in the shape and the structure of WPM particles. These strengthened internally crosslinked structures, modified by acidification, could display interesting encapsulation properties, providing an additional proof for their use as nanovectors monitoring bioactives release to the desired target after ingestion.

Atomic force microscopy-based nanomechanical methods were directly applied in order to elucidate important questions related to brain metastasis formation and amyotrophic lateral sclerosis (ALS). Force mapping with single cell force spectroscopy was combined in order to gain direct insight into the surface “screening” process of tumor cells during their extravasation into the brain parenchyma. Furthermore, comparative SCFS measurements were performed between three melanoma cell types (WM35, A2058 and A375), showing altered invasive characteristics, and blood vessel lining endothelials in order to examine how the metastatic potential relates to tumor cell’s autonomous and inter-cellular nanomechanical properties. In case of ALS by comparing the adhesion of CD8+ cytotoxic T cells isolated from wild-type as well as SOD1G93A mutant mice against wild-type motor neurons we found that cytotoxic T cells are active contributors of neurodegeneration in the development of ALS. In addition, nanomechanical mapping of wild-type and SOD1G93A mutant mice derived single elongated myoblasts and multinuclear myotubes revealed differences in elasticity during early differentiation stage into myotubes. These findings provide valuable knowledge to the understanding of brain metastasis formation and ALS pathogenesis.

Cost-effective health care technologies for detection of disease biomarkers at ultralow concentrations can significantly improve the quality of life in resource-constrained countries. However, current techniques require expensive instruments, complex conjugation protocols and tedious laboratory procedures that may not be affordable for the major part of the world population. Here, we propose to sidestep the problem by establishing a simple, relatively inexpensive sensing method employing a photonic substrate, a material affinity peptide, and a smart phone CCD detector to achieve detection of clinically relevant proteins in serum at concentrations much lower than standard enzyme-linked immunosorbent assay (ELISA). Easy to process porous silicon (PSi) micro-cavities were employed as substrates that provide a three-dimensionality, large surface area, and convenient light enhancement properties for molecular detection. Anti-histone H2B antibodies and biomarkers of severe illnesses are detected in whole serum at concentrations as low as 10 fg mL−1 by using the proposed PSi-ELISA protocol. Due to its easy use, cost effectiveness and high sensitivity, the proposed method has potential large- scale applications in ultrasensitive sensing of different other clinically relevant molecules for early stage diagnostics.

Casein micelle (CM), porous colloidal phosphoprotein-mineral complex, naturally present in milk to deliver minerals, also has several features, which could ensure its use as nanocarrier for bioactives. CM structure being not steady according to the physico-chemical conditions, its stability can be improved by intra-micellar cross-linking using transglutaminase (TGase) inducing a strengthened structure called casein nanogel. The aim of this research was to investigate the morphology and nanomechanics of casein nanogel particles cross-linked by TGase (TG-CM) using atomic force microscopy (AFM) in native-like liquid environment (lactose-free simulated milk ultrafiltrate, SMUF). Prior to AFM, TG-CM were captured by anti-phospho-Ser/Thr/Tyr monoclonal antibodies covalently bound to a gold-coated slide via carbodiimide chemistry. Surface topography and size properties evaluation revealed an increase in size of TG-CM compared to native CM, TG-CM being characterized by a mean width of 264 ± 7 nm and a mean height of 111 ± 5 nm. TG-CM displayed a relatively high contact angle (62°) indicating a limited flattening of these particles after adsorption on the substrate. The TG-CM elasticity was then evaluated applying low indentation forces on single TG-CM. The TGase treatment led to a significant modification of CM nanomechanics attributed to intramolecular rearrangements within the micellar structure. The elasticity distribution of TG-CM revealed three elasticity peaks centered at 219±14kPa, 536±14kPa and 711 ± 11 kPa. The lower elasticity peak is related to the native CM nanomechanical signature and the two stiffer peaks were attributed to the substantial changes in the TG-CM structure.