We present experimental studies of THz detection by different Heterojunction Bipolar Transistors (HBTs) fabricated using InP technology. We also show that the sensitive HBTs detectors can be used for THz spectroscopy and 2D THz imaging to study how the water content affects the polarization rate and biattenuation in fibrous sorghum leaf.

We consider a terahertz detector based on a graphene ballistic rectifier integrated with an antenna. The device demonstrates an extrinsic responsivity of hundreds of V/W in the range 70-440 GHz at room temperature with no indications of a cut-off frequency up to 0.44 THz. The device also demonstrates linear response for more than 3 orders of magnitude of power input due to its zero threshold voltage and its high saturation current.

An overview of main results concerning THz detection related to plasma nonlinearities in nanometer field effect transistors is presented. In particular nonlinearity and dynamic range of these detectors are discussed. As the main result, we will show some of the first real-world applications of the FET THz detectors: demonstrators of the imager developed for fast postal security and industrial nondestructive quality control.

Recent advances in THz detection with the use of CMOS technology have shown that this option has the potential to be a leading method of producing low-cost THz sensors with integrated readout systems. This review paper, based on authors’ years of experience, presents strengths and weaknesses of this solution. The article gives examples of some hints, regarding radiation coupling and readout systems. It shows that silicon CMOS technology is well adapted to the production of inexpensive imaging systems for sub-THz frequencies. As an example paper presents the demonstrator of a multipixel Si-CMOS THz spectroscopic system allowing for chemical identification of lactose. The THz detectors embedded in this system were manufactured using the CMOS process.

A graphene ballistic rectifier is used in conjunction with an antenna to demonstrate a terahertz (THz) detector and imager. The device is used to take an image of an optically opaque object at 0.68 THz demonstrating potential in both medical and security imaging applications.

Evening student presentation at the Bombannes summer school

A gel is a dispersed system which consists of at least two different components: a solid or flexible mesh and a fluid (water in the present case). Microgels are gels in the size range of 10 nm to 1 μm and can be used in a wide range of applications like drug delivery and smart surface coatings. If the microgel consists of acrylamides like N-isopropylmethacrylamide (NIPMAM) or N-n-propylacrylamid (NNPAM) as network component, they show a volume phase transition (VPT) at a certain temperature, the volume phase transition temperature (VPTT). An increase in temperature above the VPTT leads to an abrupt decrease in size and a decrease in temperature leads to an abrupt increase in size. The VPTT is specific for each monomer. To use microgels in sensors or for nanoactuators the thermoresponse has to be precise. That is why we investigated microgels with a core-shell architecture containing NIPMAM and NNPAM. These particles show a tunable linear change in size between 22 °C and 43 °C. Furthermore, we deposited these microgels on surfaces and investigated the properties of the coating. The properties of these particles and coatings can be adjusted by selecting specific synthesis conditions. We then did small angle neutron scattering (SANS) to determine the internal structure of the core-shell microgel.